Submissions
Author Guidelines
Authors are invited to make a submission to this journal. All submissions will be assessed by an editor to determine whether they meet the aims and scope of this journal. Those considered to be a good fit will be sent for peer review before determining whether they will be accepted or rejected.
Before making a submission, authors are responsible for obtaining permission to publish any material included with the submission, such as photos, documents and datasets. All authors identified on the submission must consent to be identified as an author. Where appropriate, research should be approved by an appropriate ethics committee in accordance with the legal requirements of the study's country.
An editor may desk reject a submission if it does not meet minimum standards of quality. Before submitting, please ensure that the study design and research argument are structured and articulated properly. The title should be concise and the abstract should be able to stand on its own. This will increase the likelihood of reviewers agreeing to review the paper. When you're satisfied that your submission meets this standard, please follow the checklist below to prepare your submission.
Ensure that the following items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
All necessary files have been uploaded:
Manuscript:
• Include keywords
• All figures (include relevant captions)
• All tables (including titles, description, footnotes)
• Ensure all figure and table citations in the text match the files provided
• Indicate clearly if color should be used for any figures in print
Graphical Abstracts / Highlights files (where applicable)
Supplemental files (where applicable)
Types of paper
- Research papers are expected to present the findings of unique research endeavors that have not been previously published elsewhere. These articles should go beyond merely reaffirming existing work and should instead bring fresh insights and contributions, such as innovative analytical methods, that expand the body of knowledge within the respective field.
- Review Articles can encompass either specific subjects within a single discipline or tackle broader topics that necessitate interdisciplinary discourse. Their primary purpose is to offer an impartial and critical assessment of a well-defined subject. Instead of being mere compilations of existing data, reviews should delve into appraisals of data quality, the current state of knowledge, and the research needed to propel understanding of the subject forward
- Short Communications serve as a platform for promptly sharing major breakthroughs or remarkable new findings that warrant swift publication. They are not intended for preliminary results. These papers must contain enough data to substantiate the research's credibility and its significant outcomes.
- Technical papers are dedicated to introducing innovative methods and protocols relevant to research methodology or culture-related techniques.
Essential title page information
- Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations. Please clearly indicate the given name(s) and family name(s) of each author and check that all names are accurately spelled. You can add your name between parentheses in your own script behind the English transliteration. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. This responsibility includes answering any future queries about Methodology and Materials. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.
• Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
The abstract in a journal article is a brief summary of the entire content of the article. It is an essential part of the article that provides a quick overview of the research topic, the methods used, the main findings, and the key conclusions. Its purpose is to provide readers with enough information to determine whether the article is relevant to their interests or research. An abstract should be concise and informative, usually consisting of 250 words depending on the specific journal guidelines. A well-written abstract helps readers decide whether they want to read the entire article or not, so it's important to detail the most critical information and capture their attention effectively.
Keywords: 3-5; words; which; have; to be closely related to the research.
Highlights (where applicable)
Highlights are a required component for this journal as they enhance the discoverability of your article through search engines. They comprise a brief set of bullet points that encapsulate the unique findings of your research, along with any new methods employed in the study.
Please submit your highlights as a separate editable file in the online submission system. Ensure the file name includes 'Highlights,' and provide 3 to 5 bullet points, each with a maximum of 85 characters, including spaces.
Graphical abstract (where applicable)
While a graphical abstract is not obligatory, we strongly encourage its inclusion as it can significantly enhance the visibility of your article online. The purpose of a graphical abstract is to succinctly convey the key content of the article through a visual representation, capturing the interest of a broad readership.
Please submit your graphical abstract as a separate file using the online submission system. Ensure that the image dimensions meet a minimum of 531 × 1328 pixels (height × width) or proportionally more. The image should remain legible when displayed at a size of 5 × 13 cm, adhering to a regular screen resolution of 96 dpi. Preferred file formats include TIFF, EPS, PDF, or MS Office files."
Manuscript Format
The manuscript should be written in 11-point Times New Roman font, double-spaced, on A4 paper with a 3 cm left margin and 2 cm margins on the other three sides. Page numbers should be placed at the bottom right of each page. Figures and tables should be included at the end of the manuscript, following the references section. The total length of the manuscript should be approximately 15 pages. For electronic submissions, we only accept documents in Microsoft Word format saved as virus-free files.
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.
- Introduction
- Background and Importance: Provide brief context on the topic and explain its relevance.
- Problem or Question: State the specific problem or research question clearly and concisely.
- Research Purpose: Explain your study's purpose and list objectives or hypotheses.
- Significance: Discuss how your research contributes to your field and why it matters.
- Scope and Limits: Define your research scope and limitations.
- Article Structure: Outline the article's key sections and organization.
- Transition: Conclude by smoothly transitioning to the next section, summarizing key points.
- Citations: Ensure proper citations following the journal's style guidelines.
- Material and methods
The "Materials and Methods" section of a research article or scientific paper is a crucial part that outlines how the research was conducted. This section provides the necessary information for other researchers to replicate the study and verify the results.
- Results
The "Results" section of a research article or scientific paper is where the authors present the findings of the study. This section is critical because it provides a detailed and organized account of the data collected and analyzed during the research.
- Discussion
The "Discussion" section of a research article is a critical component where authors analyze and interpret the results of the study, discuss the implications of the findings, and relate the research to existing literature.
- Conclusions
"Journal conclusions" typically refer to the concluding section or part of a journal article or research paper. This section is where the author summarizes the key findings of their study, discusses their implications, and often suggests directions for future research. The "conclusions" section is an essential part of scholarly articles, as it provides readers with a clear understanding of the significance and implications of the research.
Ethics approval
"Marine Biota Ethical Clearance" generally refers to the approval or clearance obtained from an institutional or governmental body responsible for ensuring that research involving marine biota is conducted in an ethical and humane manner. This clearance is a crucial step in ensuring that scientific research involving marine biota is conducted responsibly and ethically. It helps strike a balance between scientific advancement and the welfare of marine biota. Researchers should familiarize themselves with the specific requirements and guidelines set by their institution or regulatory body when conducting research involving marine biota.
In cases where ethical permits for "marine biota" are not applicable because such permits are not required, it should be noted as follows: "No permits were required for marine biota sampling."
Data availability statement
A data availability statement is a concise declaration included in a research paper or scholarly document that provides information about the accessibility and availability of the data used in the study. This statement is crucial for promoting transparency, reproducibility, and responsible research practices.
Author contributions
For transparency, we request that corresponding authors provide details of co-author contributions to the manuscript. The taxonomy encompasses 14 distinct roles, each delineating a contributor's specific involvement in the scholarly output. These roles include:
- Conceptualization
- Data curation
- Formal analysis
- Funding acquisition
- Investigation
- Methodology
- Project administration
- Resources
- Software
- Supervision
- Validation
- Visualization
- Roles/Writing - original draft
- Writing - review & editing
Please note that not all roles may be applicable to every manuscript, and authors may have contributed in multiple roles.
Funding
You are required to specify the sources of financial support that contributed to the research and/or the preparation of the article.
Acknowledgments
Acknowledgments, often found at the end of a research paper or scholarly document, are a section where authors express gratitude and recognition to individuals, organizations, or institutions that have contributed in some way to the research, writing, or support of the work.
Declaration of Competing Interest
All authors are required to reveal any financial or personal associations with individuals or organizations that might potentially influence their work inappropriately. These associations could encompass various types of competing interests, such as employment, consulting arrangements, stock ownership, compensation for services, payments for expert testimony, patent applications or registrations, and receipt of grants or other funding. Authors should disclose their interests in two ways:
- In a summary declaration of interest statement included either in the title page file (if double anonymized) or the manuscript file (if single anonymized). If there are no interests to report, authors should explicitly state: 'Declarations of interest: none.'
- In-depth disclosures should be provided in a separate Declaration of Interest form, which becomes part of the journal's official records. It is essential that potential interests are declared in both places, and the information should be consistent between the two declarations.
Refferences
In-text Citations
Please ensure that each reference mentioned in the text is also listed in the reference section (and vice versa). References cited in the abstract should be fully included. It is not advisable to include unpublished results and personal communications in the reference list, but you may reference them within the text. If you do include these references in the list, please adhere to the journal's standard reference style and replace the publication date with either 'Unpublished results' or 'Personal communication.' When citing a reference as 'in press,' it indicates that the item has been accepted for publication.
Reference style
Text: All citations in the text should refer to:
1. Single author: the author's name (without initials, unless there is ambiguity) and the year of publication;
2. Two authors: both authors' names and the year of publication;
3. Three or more authors: first author's name followed by 'et al.,' and the year of publication.
Citations may be made directly (or parenthetically). Groups of references can be listed either first alphabetically, then chronologically, or vice versa.
Examples: 'as demonstrated (Azhar, 2023a, 2023b, 2022; Azhar and Yudiati, 2023)…. Or, as demonstrated (Azhar, 1999; Yudiati, 2000)… Azhar et al. (2010) have recently shown …'
List: References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters 'a', 'b', 'c', etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Azhar, N., Yudiati, E., Trianto, A., 2010. The art of writing a scientific article. J. Mar. Biotech. Immunol. x(x): x–xx. https://doi.org/10.xxx/xxxxxx.
Reference to a journal publication with an article number:
Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2018. The art of writing a scientific article. Heliyon. 19, e00205. https://doi.org/10.xxx/xxxxxxx.
Reference to a book:
Strunk Jr., W., White, E.B., 2000. The Elements of Style, fourth ed. Longman, New York.
Reference to a chapter in an edited book:
Mettam, G.R., Adams, L.B., 2009. How to prepare an electronic version of your article, in: Jones, B.S., Smith , R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281–304.
Reference to a website:
The Ministry of Marine Affairs and Fisheries, 2023. Aquaculture Production; Vanamei Shrimp Cultivation 2021. https://statistik.kkp.go.id/home.php?m=prod_ikan_budidaya_kab/ (accessed 13 March 2033).
Journal Abbreviations Source
Define abbreviations that are not standard in this field at their first occurrence in the article: in the abstract but also in the main text after it. Ensure consistency of abbreviations throughout the article.
Image Formats
Regardless of the software you use, once your electronic artwork is finalized, please save or convert the images into one of the following formats (pay attention to the resolution requirements for different types of images as outlined below):
- EPS (or PDF): Suitable for vector drawings. Ensure that fonts are embedded or text is saved as 'graphics.'
- TIFF (or JPG): Recommended for color or grayscale photographs (halftones). Always maintain a minimum resolution of 300 dpi.
- TIFF (or JPG): Appropriate for bitmapped line drawings. Maintain a minimum resolution of 1000 dpi.
- TIFF (or JPG): For combinations of bitmapped line and halftone elements (color or grayscale), a minimum resolution of 500 dpi is required.
Please refrain from:
- Providing files optimized for screen use (e.g., GIF, BMP, PICT, WPG), as their resolution is insufficient.
- Submitting graphics with inadequate resolution.
- Sending graphics that are disproportionately large compared to the content.
Tables
Kindly submit tables in an editable text format, rather than as images. Tables can be positioned either alongside the pertinent text within the article or on separate page(s) at the end. Number the tables sequentially based on their order of appearance in the text, and position any table notes beneath the table content. We encourage a judicious use of tables, ensuring that the data presented in them do not replicate results discussed elsewhere in the article. Please refrain from including vertical lines and shading within table cells.
Figure captions
Please make sure that every illustration is accompanied by a caption. A caption should consist of a concise title (not placed directly on the figure) and a description of the illustration. While minimizing text within the illustrations, please provide explanations for all symbols and abbreviations used.
Figures and tables embedded in text
Please make certain that figures and tables included in the single file are positioned alongside the pertinent text within the manuscript, rather than at the top or bottom of the file. Additionally, ensure that the corresponding caption is situated directly below the figure or table
Common Abbreviations
Frequently used acceptable abbreviations are given below.
centimeter, cm
cubic centimeter, cm3
degree Celsius, OC
degree Fahrenheit, OF
gram, g
hour(s), h
kilocalorie, kcal
kilogram, kg
meter, m
microgram, μg
microliter, μl
micrometer, μm
micromole, μmol
milligram, mg
miligram per liter, mg.L-1
milliliter, ml
millimeter, mm
millimolar, mM
minute(s), min
molar, M
mole, mol
nanometer, nm
parts per billion, ppb
parts per million, ppm
percent, %
revolutions per minute, rpm
second, s
volume, vol
weight, wt
Proofs
Proofs will be sent by E-mail to the correspondence author and are expected to proofread the article carefully. The corrected proof should be received by the administration within a four working days.
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Article Processing Charge
Journal of Marine Biotechnology and Immunology is an open access international journal. Readers can read and download any full-text articles for free of charge (fully Open Access).
Started from the manuscript published on October 2023, Author should pay an Article Processing Charge (APC) of US$50 (IDR 600.000) per article. Once the manuscript accepted, an invoice will be sent to the Author. The accepted article will not be published until the APC was paid. The APC will be used for maintaining the DOI registration and the fulltext PDF articles production cost.
Submission Preparation Checklist
All submissions must meet the following requirements.
- This submission meets the requirements outlined in the Author Guidelines.
- This submission has not been previously published, nor is it before another journal for consideration.
- All references have been checked for accuracy and completeness.
- All tables and figures have been numbered and labeled.
- Permission has been obtained to publish all photos, datasets and other material provided with this submission.
Marine Biotechnology and Immunology
Section default policy
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
COPYRIGHT STATEMENT
Upon acceptance for publication, the copyright for this article remains with the copyright holder(s). The copyright holder(s) grant the Journal of Marine Biotechnology and Immunology a non-exclusive license to publish, reproduce, distribute, and display the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of a similar nature.
The copyright holder(s) guarantee that this article is original and that they possess complete authority to publish it. The copyright holder(s) sign for and assume responsibility for releasing this material. Concerning any plagiarism discovered in this manuscript, if applicable, the sole responsibility lies with the copyright holder(s). If the article originates from or is part of a student's skripsi, thesis, or dissertation, the student must also sign, indicating their agreement for the publication of their work.